VyOS supports executing configuration and operational commands non-interactively from shell scripts.
To include VyOS-specific functions and aliases you need to
source /opt/vyatta/etc/functions/script-template files at the top of your script.
#!/bin/vbash source /opt/vyatta/etc/functions/script-template exit
Run configuration commands¶
Configuration commands are executed just like from a normal config session.
For example, if you want to disable a BGP peer on VRRP transition to backup:
#!/bin/vbash source /opt/vyatta/etc/functions/script-template configure set protocols bgp 65536 neighbor 192.168.2.1 shutdown commit exit
Run operational commands¶
Unlike a normal configuration sessions, all operational commands must be prepended with
run, even if you haven’t created a session with configure.
#!/bin/vbash source /opt/vyatta/etc/functions/script-template run show interfaces exit
Other script language¶
If you want to script the configs in a language other than bash you can have your script output commands and then source them in a bash script.
Here is a simple example:
#!/usr/bin/env python print "delete firewall group address-group somehosts" print "set firewall group address-group somehosts address '220.127.116.11'" print "set firewall group address-group somehosts address '18.104.22.168'"
#!/bin/vbash source /opt/vyatta/etc/functions/script-template configure source <(/config/scripts/setfirewallgroup.py) commit
Executing Configuration Scripts¶
There is a pitfall when working with configuration scripts. It is tempting to call configuration scripts with “sudo” (i.e., temporary root permissions), because that’s the common way on most Linux platforms to call system commands.
On VyOS this will cause the following problem: After modifying the configuration via script like this once, it is not possible to manually modify the config anymore:
sudo ./myscript.sh # Modifies config configure set ... # Any configuration parameter
To avoid these problems, the proper way is to call a script with the
vyattacfg group, e.g., by using the
sg (switch group) command:
sg vyattacfg -c ./myscript.sh
To make sure that a script is not accidentally called without the
vyattacfg group, the script can be safeguarded like this:
if [ "$(id -g -n)" != 'vyattacfg' ] ; then exec sg vyattacfg -c "/bin/vbash $(readlink -f $0) $@" fi
Postconfig on boot¶
/config/scripts/vyos-postconfig-bootup.script script is called on boot after the VyOS configuration is fully applied.
Any modifications done to work around unfixed bugs and implement enhancements which are not complete in the VyOS system can be placed here.
The default file looks like this:
#!/bin/sh # This script is executed at boot time after VyOS configuration is fully applied. # Any modifications required to work around unfixed bugs # or use services not available through the VyOS CLI system can be placed here.
For configuration/upgrade management issues, modification of this script should be the last option. Always try to find solutions based on CLI commands first.